STEALTH
Once you are done with Getting Started, follow the steps below!
Step 1: Pre Setup
Close any running games, launchers, or anticheat software before starting the product
Disable antivirus software, Windows Real-Time Protection, and any active anticheats if required
Make sure Secure Boot is disabled and BIOS mode is set to UEFI
Download and run the loader/downloader
The file will usually have a.exeor.comextension
Download: Loader DownloadThe bootloader requires administrator privileges by default
Step 2: Activation & Login
Launch the loader as Administrator
Enter your license key and press Activate
If you receive an activation error, check the troubleshooting section
Once logged in, press Run to start the product
If you receive an error after pressing Run, check the troubleshooting section
Step 3: Statup Process
After clicking Run, do not interrupt the startup process
Do not restart, shut down, or force close anything until you are fully back on your desktop
Interrupting the process may corrupt your boot partition and prevent Windows from loading correctly
During reboot, the system will display the product logo instead of your motherboard logo
Once the countdown finishes, the system will reboot automatically
Step 4: Launching the Product
After loading into Windows, launch the game
The product menu should appear within approximately one minute
If the menu does not appear, check the troubleshooting section
Trouble Shooting
Activation / Loader Issues
Log out and log back into the loader
Run the loader only once per session
Multiple launches may break the sessionAlways launch the loader as Administrator
Statup Issues
Make sure Secure Boot is disabled
Verify BIOS mode is set to UEFI
Disable antivirus and Windows Defender protection
Product Menu Not Appearing
Wait at least one minute after launching the game
Restart the loader and inject again
Reboot the PC and repeat the process
Performance Issues / ESP Lag
Lower in-game FPS cap
Reduce graphics settings
Disable Anti-Aliasing
Disable NVIDIA DLSS
Loader Not Opening / Connection Issues
Install and enable a VPN such as:
If using Cloudflare Warp:
Open the app from the system tray
Toggle Warp ON